CLICK TO CALL NOW

Cabinet refacing

Cabinet refacing is a way to change how your cabinets look without tearing out the whole cabinet box. The outside gets updated with new doors, new drawer fronts, new finish on the visible parts, and often new pulls or knobs for a clean, simple kitchen cabinet makeover.

If your kitchen feels old but the cabinet layout still works, this service may be a good fit for you. LTC Cabinetry helps homeowners, landlords, and small business owners with Cabinet refacing in East Metro Atlanta when they want a fresh look without the mess of a full replacement.

Common Problems Cabinet Refacing Solves in East Metro Atlanta


Signs You Might Need Cabinet Refacing


Many people call for kitchen cabinet refacing when the cabinets still open and close, but the room looks worn out. In a lot of homes, the cabinet boxes are still solid, yet the doors, drawer fronts, and finish make the whole kitchen feel dated.

Here are some common signs that it may be time for cabinet resurfacing, cabinet door replacement, or drawer front replacement:

  • Your cabinet doors look faded, scratched, chipped, or stained from years of cooking, grease, and cleaning.
  • The layout still works, but the style feels old and brings down the look of the whole kitchen.
  • You want a new color or a simple shaker-style update without the cost and mess of tearing everything out.
  • Your drawers and doors no longer match because of past patch jobs, water marks, or sun fading near windows.
  • You plan to sell, rent, or update the home and want a cleaner look with cabinet hardware upgrades and fresh surfaces.
  • You want refacing existing kitchen cabinets because the cabinet boxes are sturdy, but the visible parts are the problem.

What Happens if You Ignore the Problem


Old cabinet surfaces usually do not get better on their own. Peeling finish, loose doors, worn drawer fronts, and dated colors can make the kitchen feel darker, dirtier, and more run-down than it really is. Small finish issues can also trap grease and grime, which makes cleaning harder over time.

In East Metro Atlanta, heat, humidity, and daily cooking moisture can be hard on older finishes and worn edges. If water gets around sink-base areas or damaged door corners, the surface can swell, stain, or keep peeling. When that happens, a simple style update may turn into a bigger repair job later.

How LTC Cabinetry Handles Cabinet Refacing


LTC Cabinetry starts with a simple plan. For many homes in East Metro Atlanta, cabinet refacing means keeping the cabinet boxes that still work well and changing the parts you see every day. That can include kitchen cabinet refacing, cabinet door replacement, drawer front replacement, cabinet veneer installation, and cabinet hardware upgrades.

Simple Step-by-Step Process


Most cabinet resurfacing jobs follow a clear path so the space stays organized and the finish looks clean.

  • Site visit and walk-through: We look at the cabinet layout, door style, drawer count, box condition, and any damage from water, grease, or loose hinges. We also take measurements for new doors, drawer fronts, and exposed end panels.
  • Style and material selection: You choose the new look. This may include shaker cabinet refacing, wood or rigid thermofoil doors, color choices, veneer match, and new pulls or knobs for cabinet style updates.
  • Prep work: Old doors, drawer fronts, and hardware are removed. Cabinet frames are cleaned and prepped so the new finish bonds well. Any small repairs to worn edges or loose parts are handled before refacing existing kitchen cabinets.
  • Refacing and installation: New veneer or laminate is applied to the visible cabinet faces. Then the new doors, new drawer fronts, hinges, and hardware go on. Everything is lined up so reveals are even and drawers open and close smoothly.
  • Final check and clean-up: We inspect the fit, adjust doors, test drawers, and clean the work area. Before we leave, we walk the space with you and go over care tips for your new cabinet refacing work.

This process works well for residential cabinet refacing and some commercial cabinet refacing projects across DeKalb County and nearby cities like Lithonia, Stonecrest, Decatur, Snellville, and Conyers.

Equipment, Safety, and Local Conditions


Good Cabinet refacing starts with clean cuts, careful prep, and a tight fit. For cabinet refacing in East Metro Atlanta, LTC Cabinetry uses measuring tapes, laser levels, hinge jigs, drills, drivers, trim saws, routers, and sanders with dust collection. Spray and brush-applied finishes may be used, based on the door style, site conditions, and the type of kitchen cabinet makeover you want. For kitchen cabinet refacing, each cabinet opening is measured one by one. That helps with cabinet door replacement, drawer front replacement, and cabinet style updates so the new parts sit straight and close right.

On most cabinet resurfacing jobs, floors and counters are covered first. Hardware is removed and labeled. Cabinet boxes are cleaned and lightly prepped before cabinet veneer installation. That helps the new finish bond better. For shaker cabinet refacing and other custom cabinet refacing work, the crew also checks box condition, drawer alignment, door swing, and spacing near appliances.

Some of the main safety steps are simple, but they matter a lot:

  • Dust is controlled with vacuums, sanding tools, and work-area masking.
  • Walkways are kept clear so people can move through the home safely.
  • Sink base cabinets are checked for leaks before new materials go on.
  • Under-cabinet lights, outlets, and trim are worked around with care.
  • Finishes, adhesives, and cleaners are used by label directions, with airflow managed during the job.

Homes across DeKalb County and nearby cities can bring different challenges. In Lithonia, Stonecrest, Decatur, Tucker, Avondale Estates, and Stone Mountain, many kitchens have older cabinet boxes that are still strong but not perfectly square. That can call for filler strips, trim scribing, and hinge adjustment. In Conyers, Snellville, Lawrenceville, Grayson, Stockbridge, McDonough, and Covington, summer heat and humidity can slow dry times for some coatings and adhesives. Pollen season can also affect open-air prep work. That is one reason many parts of refacing existing kitchen cabinets are done in a more controlled work setting when needed.

Permit needs are usually simple. Cabinet refacing for kitchen remodels often does not need a permit if the cabinet layout stays the same and no plumbing, wiring, or walls are moved. If the job is part of a larger remodel, local permit rules may change. Old doors, drawer fronts, hinges, and packaging are gathered and removed from the site. That helps keep residential cabinet refacing and commercial cabinet refacing cleaner for homes and work spaces across East Metro Atlanta.

When Cabinet Refacing Makes Sense for Your Property or Site


Good Fits for Cabinet Refacing in East Metro Atlanta


Cabinet refacing is a smart choice when your cabinet boxes are still solid, but the outside looks old, worn, or out of style. Instead of tearing everything out, refacing existing kitchen cabinets keeps the main cabinet boxes and updates the parts you see every day. That often includes cabinet door replacement, drawer front replacement, cabinet veneer installation on the face frames, and new pulls, knobs, or hinges. For many homes and light commercial spaces, that means less mess, less downtime, and a faster kitchen cabinet makeover than a full cabinet replacement.

This service is often a good fit for people in Lithonia, Stonecrest, Stone Mountain, Tucker, Decatur, Avondale Estates, Clarkston, Scottdale, Conyers, Snellville, Lilburn, Lawrenceville, Grayson, Norcross, Stockbridge, McDonough, Rex, Morrow, Forest Park, and Covington who want a clear style update without changing the whole room:

  • Homeowners whose cabinet boxes are in good shape, but the doors are chipped, faded, or dated
  • Families who want kitchen cabinet refacing instead of a full tear-out that can leave the kitchen down for longer
  • Property owners who like their current kitchen layout and only want cabinet style updates
  • People who want shaker cabinet refacing, slab fronts, or another cleaner door style
  • Homes with worn drawer fronts, loose handles, or old hinges that need drawer front replacement and cabinet hardware upgrades
  • Owners planning cabinet refacing for kitchen remodels where the counters, backsplash, or paint are also getting updated
  • Rental property owners who want a fresh look for the kitchen without the cost of all-new cabinets
  • Businesses that need commercial cabinet refacing in offices, break rooms, salons, reception spaces, or small work kitchens
  • Homeowners who want custom cabinet refacing to better match new flooring, wall color, or countertops
  • People searching for a cabinet refacing contractor or cabinet refacing near me in East Metro Atlanta who want a practical middle ground between repainting and full replacement

Residential cabinet refacing works best when the cabinet boxes are level, firmly attached, and free from major water damage. If the boxes are sound, cabinet resurfacing can change the whole feel of the room. LTC Cabinetry provides cabinet refacing in East Metro Atlanta and across DeKalb County and nearby areas, helping homeowners get a cleaner, newer look without starting from zero.

When You Might Need Something Else


Cabinet refacing may not be the right move if the cabinet boxes are warped, soft from water damage, swollen particleboard, moldy, or pulling away from the wall. It also may not fit if you want to change the kitchen layout, add a lot more storage, move appliances, or fix major structural problems. In those cases, new cabinets, box repairs, or a fuller remodel may make more sense than cabinet resurfacing alone.

How Cabinet refacing Fits Local Needs in East Metro Atlanta


What Properties and Sites Typically Look Like Here


Across East Metro Atlanta, many kitchens have cabinets that still work well but look old. That is a big reason Cabinet refacing makes sense here. In places like Lithonia, Stonecrest, Stone Mountain, Decatur, Tucker, Conyers, Snellville, and Stockbridge, it is common to see sturdy cabinet boxes with worn doors, faded finishes, loose drawer fronts, and older hardware. Homeowners often want a cleaner, newer style without the cost and mess of a full tear-out.

The area has a mix of older homes, newer subdivisions, townhomes, and small commercial spaces. That mix makes kitchen cabinet refacing and cabinet resurfacing a good fit for many kinds of properties.

  • Brick ranch homes and split-level houses built from the 1960s through the 1980s in DeKalb County, where cabinet boxes may still be solid but the doors and drawer fronts look dated
  • Two-story subdivision homes from the 1990s and 2000s in Rockdale, Gwinnett, Henry, and Newton counties, where owners want cabinet style updates before selling or after moving in
  • Townhomes, condos, and smaller homes in Decatur, Avondale Estates, Clarkston, and Scottdale, where a kitchen cabinet makeover can change the whole room without a full remodel
  • Homes with stained oak cabinets, raised-panel doors, or aging thermofoil fronts that need cabinet door replacement and drawer front replacement
  • Busy family kitchens near major commuter routes like I-20, Highway 78, and I-285, where people want less downtime and less demo inside the home
  • Rental homes and investment properties that need a clean, updated kitchen look at a lower cost than all-new cabinetry
  • Small offices, churches, break rooms, salons, and other light commercial spaces that can benefit from commercial cabinet refacing instead of full cabinet replacement

In many of these properties, the layout still works. The problem is the finish, the door style, or the worn fronts. Refacing existing kitchen cabinets can fix that. It can also make room for cabinet hardware upgrades, shaker cabinet refacing, and custom cabinet refacing options that better match the home.

LTC Cabinetry serves East Metro Atlanta, from Lithonia and Stonecrest to Decatur, Tucker, Conyers, and Snellville. Around this side of metro Atlanta, kitchens get used hard every day in family homes, rentals, and small work spaces, so cabinet refacing often comes up when cabinets still work but the room feels worn out.

A Little About East Metro Atlanta


East Metro Atlanta has a practical, lived-in feel. You have commuters heading into town, growing families, retirees, landlords, and small business owners. Many people here want a kitchen that looks clean and up to date, but they do not always want a full gut job. That is one reason kitchen cabinet refacing makes sense in this area. It can give older kitchens a fresh look without tearing out every cabinet box.

Weather, Wear, and Everyday Conditions


Life here means hot, humid summers, heavy rain at times, lots of pollen, and long days of indoor-outdoor traffic. Kitchens stay busy all year. Heat, steam, grease, cleaning products, and daily use can wear down finishes on cabinet doors and drawer fronts. In older homes, some doors may start to look faded, chipped, or dated even when the cabinet boxes are still solid. That is where refacing existing kitchen cabinets, cabinet door replacement, and drawer front replacement can be a smart next step.

Property Types and Local Patterns


This part of the Atlanta area has a wide mix of properties. You will see older ranch homes, split-level houses, brick homes from past decades, townhomes, condos, rental houses, and newer subdivisions. There are also break rooms and storage areas in salons, offices, churches, and other small commercial spaces. In many of these places, the basic cabinet layout still works fine. The bigger issue is style, color, or worn surfaces. That is why cabinet resurfacing, cabinet veneer installation, shaker cabinet refacing, and cabinet hardware upgrades are common choices for both residential cabinet refacing and small commercial cabinet refacing.

Nearby Places and Local Reference Points


Our service area covers the roads and places many locals use every week. That includes neighborhoods and business areas near spots like these:

  • I-20, US-78, Memorial Drive, Rockbridge Road, and Covington Highway
  • The Mall at Stonecrest and the Arabia Mountain area
  • Stone Mountain Park and nearby neighborhoods in Stone Mountain
  • Downtown Decatur, Avondale Estates, Clarkston, and Scottdale
  • Olde Town Conyers, Scenic Highway in Snellville, and busy retail areas in Lilburn and Lawrenceville

These local routes and stops matter because homes and businesses across East Metro Atlanta can have very different ages, layouts, and cabinet styles from one area to the next. A kitchen cabinet makeover in a 1970s Lithonia ranch may call for a different look than custom cabinet refacing in a newer Gwinnett subdivision.

From DeKalb County to nearby parts of Rockdale, Gwinnett, Henry, Clayton, and Newton counties, LTC Cabinetry works across East Metro Atlanta with cabinet refacing that fits the homes, routines, and neighborhoods people live in every day.

Where LTC Cabinetry Fits In


Cabinet refacing is a common choice in East Metro Atlanta because many homeowners want a fresh kitchen without tearing everything out. In a lot of homes, the cabinet boxes still work fine, but the doors, drawer fronts, and finish look old, worn, or out of style. That is where LTC Cabinetry fits in. We help with kitchen cabinet refacing, cabinet door replacement, drawer front replacement, and cabinet hardware upgrades that give the room a clean new look.

LTC Cabinetry works across East Metro Atlanta and nearby cities throughout DeKalb County and beyond. That includes Lithonia, Stonecrest, Stone Mountain, Tucker, Decatur, Avondale Estates, Clarkston, Scottdale, Conyers, Snellville, Lilburn, Lawrenceville, Stockbridge, McDonough, Rex, Morrow, Forest Park, and Covington. If you are searching for a cabinet refacing contractor for a house, rental, or small commercial space, we handle places like yours every day.

Questions People Often Ask About Cabinet refacing


What is cabinet refacing?

Cabinet refacing keeps your main cabinet boxes and updates the parts you see every day. That can include cabinet door replacement, drawer front replacement, new veneer on the face frames, and new pulls or knobs. It is a smart way to get a kitchen cabinet makeover without tearing out the whole kitchen.


How do I know if refacing existing kitchen cabinets is a good fit?

It is usually a good fit when your cabinet boxes are still solid, level, and in good shape. If the layout works for you and you mainly want a new style, cabinet style updates can make a big change. If the boxes are badly damaged, full replacement may make more sense.


Can I change the look of my kitchen with custom options?

Yes. Many homeowners choose custom cabinet refacing so they can update the color, door style, and hardware. Shaker cabinet refacing is a popular choice, and cabinet hardware upgrades can help the whole room feel newer.


Is cabinet resurfacing less messy than a full cabinet replacement?

In many cases, yes. Cabinet resurfacing and cabinet veneer installation usually create less tear-out than a full remodel because the existing boxes stay in place. That can mean less mess in your home and less disruption to your daily routine.


Do you offer cabinet refacing only in Lithonia?

No. LTC Cabinetry offers cabinet refacing in East Metro Atlanta and across nearby parts of DeKalb County, Rockdale County, Gwinnett County, Henry County, Clayton County, and Newton County. That includes Lithonia, Stonecrest, Stone Mountain, Tucker, Decatur, Conyers, Snellville, Lawrenceville, Stockbridge, McDonough, Rex, Morrow, Forest Park, and Covington.


Do you handle both homes and business spaces?

Yes. LTC Cabinetry can help with residential cabinet refacing and commercial cabinet refacing. If you are searching for a cabinet refacing contractor near Lithonia or need cabinet refacing for kitchen remodels in East Metro Atlanta, the team can talk through your space and goals.

Get Help with Cabinet refacing in East Metro Atlanta


If your kitchen feels dated, worn, or hard to enjoy, LTC Cabinetry is ready to help with Cabinet refacing in East Metro Atlanta. We work with homeowners and property owners across Lithonia, Stonecrest, Stone Mountain, Decatur, Tucker, Conyers, Snellville, Lilburn, McDonough, and nearby cities. Whether you want kitchen cabinet refacing, cabinet door replacement, drawer front replacement, or a full kitchen cabinet makeover, it starts with a simple talk about what you want and what your cabinets can support.

Reach out by phone or through the form, and we can set up a quick walk-through or a simple estimate. It is not a pushy sales visit. It is just a clear, honest way to see if cabinet resurfacing or custom cabinet refacing is the right fit for your home or property in DeKalb County and the rest of East Metro Atlanta.